maxi cosi peach amber Maxi-Cosi Pria All-in-One Convertible Car Seat SeaDrift
SKU: 49300315949
maxi cosi peach amber

maxi cosi peach amber Maxi-Cosi Pria All-in-One Convertible Car Seat SeaDrift

$21.98 $24.42
Save 10%
No.2 Bestseller on ciba.bj >

Pay in installments of $6.11 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 3 - Jul 8

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

maxi cosi peach amber Maxi-Cosi Pria All-in-One Convertible Car Seat SeaDriftThe Maxi Cosi Pria All in One Convertible Car Seat eliminates the need for multiple purchases across your child's early years. This single seat covers three distinct modes: rear facing from 5 to 40 lbs, forward facing from 30 to 65 lbs, and belt positioning booster from 40 to 100 lbs. That continuous span covers approximately 10 years of use, making it one of the most cost effective all in one solutions available for families seeking a long term,

The Maxi-Cosi Pria All-in-One Convertible Car Seat eliminates the need for multiple purchases across your child's early years. This single seat covers three distinct modes: rear-facing from 5 to 40 lbs, forward-facing from 30 to 65 lbs, and belt-positioning booster from 40 to 100 lbs. That continuous span covers approximately 10 years of use, making it one of the most cost-effective all-in-one solutions available for families seeking a long-term, versatile car seat investment.

Daily usability defines this seat's design. The QuikFit headrest and harness system adjusts both simultaneously with one hand and without rethreading—eliminating the most common source of incorrect harness height as your child grows through multiple size changes. ReclineFit's three recline positions ensure proper fit regardless of your vehicle's rear seat angle. The In and Out harness holders keep straps accessible and out of the way during loading, reducing friction during frequent daily buckle cycles. Machine-washable and dryer-safe EcoCare fabric is made from 100% recycled plastic bottles, while PureCosi fabric options eliminate added fire retardant treatments for families prioritizing cleaner material choices.

Safety and travel flexibility are engineered throughout. The seat meets federal side impact protection standards, installs securely with the 1-click LATCH system, and carries FAA certification for aircraft use. Two removable, dishwasher-safe cup holders add practical convenience for every trip. Removable infant pillow and cushions provide newborn support without requiring harness rethreading during transitions.

Perfect for: Families seeking a single birth-to-booster car seat solution, budget-conscious parents avoiding multiple seat purchases, travelers and frequent flyers needing FAA-certified gear, parents prioritizing sustainable or chemical-free fabric options, households with limited vehicle space.

Key Benefits:

  • Three modes of use: rear-facing 5–40 lbs, forward-facing 30–65 lbs, booster 40–100 lbs
  • QuikFit one-hand headrest and harness adjustment without rethreading
  • ReclineFit with three recline positions for comfort and proper fit
  • In and Out harness holders keep straps accessible during loading
  • EcoCare fabric made from 100% recycled plastic bottles
  • PureCosi fabric options made without added fire retardant treatments
  • Machine washable and dryer safe seat cover
  • Removable infant pillow and cushions for newborn support
  • Federal side impact protection standard compliant
  • 1-click LATCH system for quick and secure installation
  • FAA certified for aircraft use
  • Two removable, dishwasher-safe cup holders included
  • 10-year lifespan from date of manufacture
  • Approximately 10 years of continuous use without upgrading

Pria All-in-One vs. Magellan: The Maxi-Cosi Pria is the lighter, more travel-friendly option while covering the same birth-to-booster range as its competitors. Its combination of portability, all-in-one capability, and FAA certification makes it ideal for families who travel frequently or navigate multiple vehicles.

Choose Your Style and Sustainability: The Pria All-in-One is available in 15 color options ranging from sophisticated neutrals (Midnight Slate, Blackened Pearl, Seascape) to bold statement colors (Sea Storm, Dewberry Rain, Peach Amber) and beloved Disney collaborations (Mickey, Minnie, Minnie Neutral). Select EcoCare fabrics for sustainable, recycled-material construction, or PureCosi for fire retardant-free options.

ANB Baby carries the complete Maxi-Cosi car seat lineup and full range of convertible car seats for families comparing options.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 49300315949

Discover Niche Categories That Outsell maxi cosi peach amber

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 1525 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
AB
Chelsea, US
★★★★★ 5
High quality and robust
Size: 12 Pairs, Pattern Name: Banana Plugs
Easily the best plugs I've found at a reasonable price. Solid feeling with good quality and they look good with easy to see red/black labeling. The tips tend to unscrew too easily, but this is a non-issue when they are in use, just something you have to be careful not to lose when assembling. It's a bit tricky to spread the wire out evenly at the exact right length. If screwing the plug together is hard at all, go back and shorten how much wire you bend over the lip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 16, 2025
W
Verified Purchase
William
Carnegie, US
★★★★★ 5
Solid banana clips
Size: 5 Pack, Pattern Name: Banana Plugs
Ah yes, I used these solid banana plugs to convert my wires. It’s pretty easy to set up once the wire housing has been stripped and really cleans things up nicely. I haven’t had any discernable hissing, noise problems, or connection issues.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
L
Verified Purchase
Leyland Cypress
Whiting, US
★★★★★ 3
Get the right wire guage
Size: 1 Count (Pack of 1), Pattern Name: Banana Plugs
I rate the banana plugs themselves 4 stars. They are everything I expected and work as advertised. It's the experience of assembly that I rate three stars. The way these work is -- you strip off the outer insullation of your wire and separate the two leads (positive and negative). Then you strip some length of insulation off the end of one of your leads, you unscrew the banana plug so that it separates into its respective base (lower) and contact (upper) halves, you slip the wire up through the base, you flare the copper strands of the wire and fold the individual strands over the very top of the base (about 1/16 of an inch) (taking care not to extend the strands over the threaded barrel of the base), then you screw the upper contact onto the lower base and voila, banana plug / wire assembly. It's not as complicated as it sounds. Go to the Monoprice website and watch their excellent instructional video. Here's the thing though. While the assembly is not complicated, it is tricky, and if you don't get your proportions right the first or second or third time, you'll have to do it over. Fist of all, if your wire guage is relatively thin, like my 16-guage speaker wire, you'll find that the entire wire, insullation and all, will slip right through the base of the plug without butting up against the bottom of the base. If this is the case, then the wire is left to sort of flop around inside the plug and that has a kind of unfinished, amateur look and feel to it, whereas if the wire butts up against the bottom of the base, it has a solid, one-piece professional look. So, to my mind, there's a sweet-spot for wire guage that works best with this plug -- not too thin and not too thick. And since Monoprice has debunked the thicker-is-better myth (the quality of the copper is the real determinant), then you should feel free to get the wire guage that fits the plug. Next -- and here's where it gets tricky -- once your copper extends beyond the top of the base, you'll need to limit this extension to about a sixteenth (no greatrer than a fourth) of an inch. Then you very delicately flare out the individual strands, in a 360- degree arc, and fold the strands over the top of the base. This takes a fair degree of manual dexterity, especially if the wire is "floating" inside the base and its travel is not stopped where the insullation meets the base. You'll have to hold the wire and base steady in the fingers of one hand, then flare out the wire strands with either your fingers or a suitable object (the working end of a ball-point pen worked for me) with the other hand. This one-sixteenth measure is important. If you extend wire strands beyond the top and over the threads of the base, you'll find that screwing the contact end onto the base is impossible and you'll need to start over. One or two strands is OK and almost unavoidable. In that case the screwing will catch but if you take a pair of pliers to it you can muscle through. By the way, you can avoid the whole mess by getting the open-screw type, which I'm sure will work just as well without any of the hassle of assembly. Like anything else, if you do it a few times to make the mistakes and learn the tricks, then it will become second nature, and if you've already done that, then my review might seem overly fussy. In that case feel free to leave comments to help other readers.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 15, 2012
J
Verified Purchase
JBDoge
Dallas, US
★★★★★ 5
Wish they came with instructions...
They are cheap and work great. They plug right into my Pioneer vsx521 receiver and my Paradigm Atom monitor speakers. I wish they came with instructions, because it took me about 10 minutes to realize the bottom part unscrews in addition to the top part. Here are my instructions for installation: 1) Unscrew the bottom part of this connector (the thin metal underneath the red/black ring). 2) Make sure the Banana Plug (which may be loosely screwed into the top part of the connector) is fully tightened down 3) Strip your wire tips to 3/8 of an inch (or just slightly under) 4) Run the first newly stripped wire end through the bottom part you removed in step 1, such that the stripped end of the wire is entering through the flat end and exiting through the smaller threaded end. 5) Leave about 1/8 to 3/16 of an inch of stripped wire hanging past the exit hole. 6) As evenly spaced as possible, bend the over-hanging wire strands over the exit hole (all around it, like a hat). If done properly, the wire should not fall out if you give it a VERY GENTLE tug. 7) Screw the top metal part (with the actual banana plug) back onto the bottom part. It may be difficult if your stripped wire is hanging too low. I've used a pair of pliers to grip the bottom part of the connector while I twist the banana plug side with my hand. If done correctly, you should be able to put a lot of tension between the wire and connector without removing/damaging it. UPDATE: I just recently helped my dad install his 5.1 system without these... it sucked... This item (5 pairs of them in this case) and a good wire stripper can save you alot of pain (both physical and mental). The connectors on the back of his receiver are the kind where bare wire comes in from the side and then the connectors screw down (with a banana plug hole in the center which is where this product would come into play). I felt like a surgeon trying to get a bare wire end into the little slot, and then holding it there while I tighten the connector which is almost impossible since they are so close together... GET THESE!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2012
R
Verified Purchase
R. Jackson
San Leandro, US
★★★★★ 1
'Monoprice' = Worst stereo banana plugs on T-H-E market.
Size: 5 Pack, Pattern Name: Banana Plugs
The absolute WORST in stereo banana plugs - HANDS DOWN. After installing stereos and components for over 30 years, I'd say I'm experienced. These banana plugs fail at EVERY part of the design. Allow me to explain... 1) Starting with the tips, they are loose off the bat and fit LOOSELY in either the stereo input studs or speaker input studs by their 'girth'. They do not firmly seat in any plug and for this setup, I'm using a nearly $2K setup all together. They 'rock' back and forth (when inserted) and thus create a non-permanent connection, again, seriously making these utter junk. I've seen some items you can get by with over the years, but these aren't even rock bottom. They are unusable! 2) Next, the banana plugs themselves comes as three pieces. No non loosening o-ring seal but a plastic colored want-to-be imitation for positive and negative notation. Why do these stupid things come in three pieces? - I simply can't tell you why. I do know they serve no specific piece to solving the puzzle of installation so why do they come in three pieces...? My speculation is they are cheap china knockoffs. 3) The 'way' in which you normally install the trimmed wiring internally with the 'two-piece' design permits you to firmly CRIMP and hold the unsheathed wiring; but these do not. The overlap/overlay of the exposed wiring can only be about 2/16's of an inch thus not much to create a proper connection with. This single fact eliminates these plugs as even worthwhile component add ons; period. If you can't achieve a good ground/wiring connection, these are a defeated purpose... 4) Because of the design of these, they have no room to crimp and screw on the cable so your forced to nearly break your fingers in an attempt to get the unsheathed wire to overlay the internal threading and twist them on with all your might. This in effect breaks nearly every wire thread internally and then they breaks off inside. Absolute garbage. These are total pieces of non-quality junk that did nothing but makes me waste 30 minutes on attempting to get them securely on and another 25 to locate my Amazon account, find this product in my order and ALARM anyone else from making the same mistake I made. Now, I find out I can't even get a return on these. Thanks Amazon. Thank you third party retailer. You just made me a very dissatisfied decade long customer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 17, 2016

recommand products

Succulent Arrangement
24.40
Rat Tail cactus 'Aporocactus flagelliformis' 6" Pot / Light Green / Without Pot
21.06
Buy Shell Planter
28.85
Buy San Pedro Cactus Phoenix, AZ | Echinopsis pachanoi
29.68
Rat Tail Cactus
25.66